National level view
overall left and right padding of widgets - 24 px.
Low
National level view
Space between widgets -24px
Low
National level view
Heading to be left aligned with the widgets
Low
National level view
Space between heading and the widgets - 32 px
Low
Households / pop/ bnets delivery cards
Icons to be resized to 40x40px
Medium
Urvi
Completed
Households / pop/ bnets delivery cards
Space and padding of the KPIs inside the cards to be in alignment with figma
Medium
Urvi
Completed
Households / pop/ bnets delivery cards
Font size of the KPIs to be 36pts. Colour also to be changed to secondary.
High
Urvi
Completed
Household coverage
Space between heading and subhead to be 8px
Low
Bhanu
Household coverage
The ellipses dots on the the top right corner to be aligned to the heading
Medium
Bhanu
Household coverage
Restriction of infinite horizontal and vertical scroll.
High
Bhanu
To be discussed
Household coverage
Strokes of the shape outlines to be 1pt
High
Bhanu
In progress
Household coverage
Custom alignment of the KPIs on maps to be centered to the shape
High
Bhanu
To be discussed
Household coverage
Filter chips to be in alignment with figma
Low
Bhanu
Household coverage
Right and bottom padding of the zoom notch - 24px
Low
Bhanu
Household coverage
Tooltips should be attached to the shape and not the KPI
High
Bhanu
in progress
Population coverage
All changes in household coverage are applicable here as well
Medium
Bhanu
Coverage by province
Heading top padding to be fixed
Medium
Indroneil
Needs change in generic chart component
Coverage by province
Search and ellipses to be top aligned with the heading
Medium
Indroneil
Needs change in generic chart component
Coverage by province
Search field to be resized based on figma - height 32px, outline colour to be changed
Medium
Indroneil
Needs change in generic chart component
Coverage by province
The Tete card to be resized and aligned so that outer padding is 24px
Medium
Indroneil
Completed
Coverage by province
Font size of KPIs to be consistent
High
Indroneil
Completed
View Dashboard CTA
Hover be highlighted in Orange (Primary) and not blue
Medium
Indroneil
in progress
Secondary Button
Remove radius of the button
High
The three dots (Ellipses) on widgets
To be top aligned with the heading and a padding of 24px top and bottom
Medium
Tooltip - on data sync card
Font size in the tooltip to be 14px and the placement to be consistent
High
Urvi
In Review
Setting the font size to 14 px might make it inconsistent with other tooltips as the fontsize for them is larger.
Filters in table
There should be 16px space between the chip and the label.
Medium
Filters in table
Close icon color and placement to be in line with figma
Medium
Overview
overall left and right padding of widgets - 24 px.
Low
Overview
Space between widgets -24px
Low
Overview
Heading to be left aligned with the widgets
Low
Overview
Space between heading and the widgets - 32 px
Low
Filter
The filter toggle to be closer (16px from the Date range input)
Medium
Tabs
Font size of the inactive tabs to be 16pts, weight - 400
High
bhanu
Tabs
16px space between the progress bar and the numbers
Medium
Data Sync
2nd Label of second KPI to be in a single line
High
Urvi
In Review
Achieved upto 1280px, the line will wrap if the width is below this.
Households
Icon size to be 40px
Medium
Households
Check Horizontal & Vertical alignment of KPI labels
Medium
Households
Insights - Arrow icon size to be reduced to 16x16px. Space between the insight and the icon to be 4 px
Medium
Households
The donut chart is slightly cut on the top and bottom. The container of the card has to expanded
Low
Population covered
All changes that are applicable to household card
Medium
Bednets distributed
All changes that are applicable to household card
Medium
Households not delivered
Inner card padding to be 24px
Medium
Households not delivered
Space between heading and subhead to be 8px
Low
Households not delivered
Size of the donut chart to be increased
Medium
Households not delivered
Alignment of the donut chart to be horizontal with the adjacent pie widget
Low
Households not delivered
Alignment of the donut chart should not shift due the filter/ drill down appearing
Medium
Complaints by type
All changes that are applicable to households not delivered card
Medium
Households coverage ranking
Inner padding around the card to be 24 px
Medium
Households coverage ranking
Space between the graph and the heading is 32 px
Medium
Households coverage ranking
Space between the header and the subhead to be 8 px
Medium
Households coverage ranking
Y Axis labels to have percentage (%) along with the number
High
Bhanu
InProgress
Households coverage ranking
Tooltip to be in line with figma. Remove blue border. Make the name bold
High
Urvi
In Review
Inventory status
All changes that are applicable to household coverage ranking
Medium
Households Visited
Overall inner padding to be 24 px
High
Households Visited
The ellipses(three dots) to be top aligned with the heading
Medium
Households Visited
Percentage / Number toggle height to be 28px
Low
Households Visited
The space between graph and heading to be 32px
Medium
Households Visited
Percentage to be displayed on the labels
High
Bhanu
In Progress
Households Visited
Tooltip to be in line with figma
Low
Urvi
In Review
Population covered
All changes that are applicable to Household visited card
Medium
Bednets distributed
All changes that are applicable to Household visited card
Medium
Households not delivered
All changes that are applicable to Household visited card
Medium
Target Achievement
Space between heading and subhead to be 8px
Low
Target Achievement
The ellipses dots on the the top right corner to be aligned to the heading
Medium
Target Achievement
Restriction of infinite horizontal and vertical scroll.
High
Target Achievement
Strokes of the shape outlines to be 1pt
High
bhanu
In Progress
Target Achievement
Alignment of the KPIs on maps to be centered to the shape
High
Target Achievement
Filter chips to be in alignment with figma
Low
Target Achievement
Right and bottom padding of the zoom notch - 24px
Low
Target Achievement
Tooltips should be attached to the shape and not the KPI
High
bhanu
In Progress
Target Achievement
Space between toggle and ellipses to be 16px
Low
Planned vs actual campaign progression
Target date lines are mising in the graph
High
Planned vs actual campaign progression
Tooltip to be in line with figma
Low
Urvi
Planned vs actual campaign progression
Overall inner padding to be 24 px
Medium
Planned vs actual campaign progression
The ellipses(three dots) to be top aligned with the heading
Medium
Planned vs actual campaign progression
The space between graph and heading to be 32px
Medium
Summary Report
Overall inner padding to be 24 px
Medium
Summary Report
Sort icon to be aligned to the column heading
High
Summary Report
Column headers to be in single line and the attributes to be in the second line. Make the table scrollable horizontal if needed.
High
Summary Report
Remove the outlines for all the rows. There should be only background blocks
Medium
Summary Report
The size of the day and boundary toggle to be same
Medium
Summary Report
The space between the toggle and the search bar to be 16px
Medium
Summary Report
Pagination to be in line with Figma
Medium
Complaints by boundary
Overall inner padding to be 24 px
High
Complaints by boundary
The ellipses(three dots) to be top aligned with the heading
Medium
Complaints by boundary
Percentage / Number toggle height to be 28px
Low
Complaints by boundary
The space between graph and heading to be 32px
Medium
Complaints by boundary
Percentage to be displayed on the labels
High
Bhanu
In Progress
Complaints by boundary
Tooltip to be in line with figma - have a radius
Low
Urvi
In Review
Complaints by boundary
Height of the card to be adjusted to the adjacent card
Medium
Complaints by type
The donut chart to be made larger
Medium
Complaints by type
Tooltip to be in line with figma
Low
Urvi
Complaints by status
All changes that are applicable to complaints by boundary
Medium
Complaints by type & Boundary
All changes that are applicable to complaints by boundary
Medium
Boundary wise share of complaints
All changes that are applicable to complaints by boundary
Medium
average complaint res time
All changes that are applicable to complaints by boundary
Medium
Summary Report (Open Complaints)
Overall inner padding to be 24 px
Medium
Summary Report (Open Complaints)
Sort icon to be aligned to the column heading
High
Summary Report (Open Complaints)
Column headers to be in single line and the attributes to be in the second line. Make the table scrollable horizontal if needed.
High
Summary Report (Open Complaints)
Remove the outlines for all the rows. There should be only background blocks
Medium
Summary Report (Open Complaints)
Pagination to be in line with Figma
Medium
Summary Report (Total Complaints)
All changes that are applicable to Summary (Open complaints)
Medium
Inventory status
Overall inner padding to be 24 px
High
Inventory status
The ellipses(three dots) to be top aligned with the heading
Medium
Inventory status
The space between graph and heading to be 32px
Medium
Inventory status
Percentage to be displayed on the labels
High
Inventory status
Tooltip to be in line with figma - have a radius
Low
Urvi
In Review
Stock in hand today
There should be space of 4px between available stock and req stock bars
Medium
Stock in hand today
The available stock bar should have a radius similar to req stock
Medium
Stock in hand today
The ellipses(three dots) to be top aligned with the heading
Medium
Stock in hand today
The space between graph and heading to be 32px
Medium
Stock in hand today
Percentage to be displayed on the labels
High
Stock in hand today
Tooltip to be in line with figma - have a radius
Low
Urvi
In Review
Summary report
Overall inner padding to be 24 px
Medium
Summary report
Sort icon to be aligned to the column heading
High
Summary report
Remove the outlines for all the rows. There should be only background blocks
Medium
Summary report
Pagination to be in line with Figma
Medium
Some guiding features like tooltips for the scroll and zoom component should be present
Call to be taken on labels instead of legends for graphs. Gives more clarity and a sense of Segregation.
Sort icon to be more common and functional
The Dashboard of the health campaign platform boasts an array of features that provide a comprehensive view of campaign performance, enabling supervisors to monitor their teams with ease, evaluate campaign progression, and swiftly troubleshoot any roadblocks.
This release made use of the existing DIGIT capabilities and components with minor enhancements to build different widgets to visualize the campaign KPIs. These widgets are categorised into distinct modules. The dashboard is designed such that three levels of distinct users can access the dashboard:
National
Province/State
District
There is a separate national-level page that lists all the indicators related to different campaigns across the country. From this page, the user can navigate to the respective provinces’(state’s) overview page.
The overview page is the landing page for district-level and state-level/provincial-level supervisors once they click on the respective campaign type in the card layout. A national-level supervisor will arrive at this page by clicking on the respective province(state) name from the national dashboard page. This page has a summary of the most important KPIs from each of the individual modules.
The registration and delivery page is common across all levels of supervisors. This page consists of all indicators and visualisations related to the registration of households, individuals, and the delivery of health interventions such as bednets.
The complaints page is common across all levels of supervisors. This page consists of all the indicators related to the complaints filed during the course of a campaign.
The inventory page, which is common across all levels of supervisors, consists of all information related to the stock movement across warehouses.
The features of the dashboard are described below:
General
Each page of the dashboard and individual widgets can be downloaded as PDF and JPG.
Each page of the dashboard and individual widgets can be shared across WhatsApp or email as PDF and JPG.
The tabular charts can be downloaded as Excel sheets.
The search feature in the filter boxes and service tabular reports.
Definitions for all the metrics and chart elements are viewable by hovering over the desired element/metric.
Change the period of data between today and cumulative, or select a custom date through the calendar widget
Card layout navigation for the landing page to cater to different types of health campaigns such as LLIN, SMC, IRS, etc.
National Dashboard Page
View the households, population, and distribution coverage across all provinces/states as aggregate.
View households and population coverage for each province/state through a heat map.
View provinces/states where the campaign is live and navigate to their individual dashboards.
Overview Page
Completeness of the data in the dashboard through the sync rate card.
Daily and cumulative coverage of the households, population, and interventions (bed nets).
Instances where there was no delivery due to any particular reason.
Details regarding complaints raised by frontline workers, supervisors, or the help desk.
Information pertaining to inventory movement in warehouses
Registration & Delivery Page
Coverage of household, individual, and distributions illustrated through bar graphs and heat maps.
Number of households where no delivery has taken place.
Comparison of planned campaign progression and actual campaign progression.
A summary table with drill-down upto village level that details all the KPIs on the page.
Complaints Page
Volume and ratio of complaints generated by the nature of the complaints.
Volume and ratio of complaints generated for different geographical boundaries.
Volume and ratio of the complaints as they move across workflows and statuses.
Information about the resolution time taken for complaints and the average time taken for complaints to move between different statuses.
Inventory Page
Inventory in stock at the warehouse.
Duration for which current inventory in stock will suffice for distribution.
Stock movement details (inbound, outbound, returned) for each warehouse.
Percentage and number toggle for bar charts.
Brush component for bar charts.
Heat maps with zoom-in/out, recenter buttons, and drill-downs.
Today, cumulative toggle filters.
A new component to display the list of cards based on the chart data, and includes a collection of numeric data and a circular progress bar,
Predictive line graphs.
Multi-campaign card layout.
Progress bar to show campaign duration.
Enhanced pie charts that show the aggregated value at the centre.
General
Not showing the brush component in the downloads/sharing of charts? Not Done. Enhancement.
The dashboard view at 100% of screen size is not enough to show 1 graph without scrolling and also the tabular chart names (Day toggle) are not aligned at 100%. At 80% the dashboard view looks good. Possible to make the 80% view as default? Not Done. Enhancement.
At 100%
At 80%
Page is getting refreshed automatically in between and landing on overview page Not Done. Bug.
Changing the hand symbol to mouse arrow pointer wherever there is only hover and no clickHand hover. Not Done. Enhancement. Can be picked.
Edit profile page
a. Localisation missing in the fields Not Done Bug
b. After clicking on ‘Edit Profile’ the page is stuck after clicking on Save. Not Done Bug.
Windows issue for share – to add Enhancement
Comment: In windows system, the share option is like this.
Localisation label missing Not Done Bug
Swathi Comment: Abhishek Suresh Can you explain this?
Neelakantan S can we do this at UI level.
Rename breadcrumb of National dashboard as per Figma Not Done Bug
Swathi Comment: Type of Bug: UI . Need to fix.
The title of the Page is not as per Figma - ‘’LLIN Campaign National Dashboard’’. Also the title should be configurable. Ie. it should be the same as the link which the user clicked on the landing page. Not Done. Bug. So the title should be → ‘’Name of the link on the card layout that the user selects” + Campaign National Dashboard. It should be “LLIN Campaign National Dashboard”
Swathi Comment: Type of Bug: UI . Need to fix.
For the households, population covered, Bed nets distributed Not Done Bug
a. Font size of number is not matching as per figma
b. Text is not as per figma (bold, size)
c. Insights (= no change from yesterday) → There should be no ‘=’ sign before
d. Missing → (Cumulative) under Total households/population/bednets
Swathi Comment: Type of Bug: UI. Need to fix it.
For household coverage & population coverage heat maps, even if there is no data for a boundary, the boundary name needs to be shown upon hovering In Progress Not Mentioned
Swathi Comment: Type of bug: Functional and UI. This was not mentioned Earlier.
For households coverage and population coverage heat maps, the insights should be shown on boundary and not KPI In Progress Bug
Swathi Comment: Type of bug Functionality &UI. Need to fix this.
There should be a restriction on the heat map to limit the extent of scrolling outside the map area. Currently the user can scroll too far outside the map area into the white space and it is difficult to get back on the map area by scrolling back in Not Done Bug
Swathi Comment: This has already brought points to Neelakantan S point of view . But he said it’s difficult to fix.
On the heat maps, if there is no change wr.t previous day, then only the message ‘’same as yesterday’’ should be displayed and not 0% . This should be applicable for all insights where delta = 0 In Progress
Swathi Comment: Type of Bug UI. Need to fix it.
The different stroke color upon hover over boundary is not being shown after drill down for lower level boundaries Invalid.
The font of the numbers on the heat maps needs to match with figma. Currently its not readable. Not Done
Swathi Comment: Type of Bug: UI. Need to discuss with Neelakantan S. Can we change it to Bold?
In the coverage by province - Not Done
a. Localisation missing on the no results
b. The kebab menu is not of the same shade as per figma
c. The search bar should show ‘Search province’ and not ‘Search’ as mentioned in Figma.
Swathi Comment: Type of Bug: UI. Need to discuss with Neelakantan S. Need to fix it.
When downloading/ sharing the coverage by province card, the text is getting misaligned - Not Done Enhancement
Please change the subheading to “Click on ‘View Dashboard ’ next to each province name to view the province level dashboard ” Not Done Enhancement Can be picked
Swathi Comment: This is done as per Figma Abhishek Suresh. So making it as an Enhancement
‘Total households visited today’- Not Done Bug
a. Rename Total Households Visited → Total Households Visited Cumulative
Swathi Comment: This is done as per Figma Abhishek Suresh . So making it as Enhancement. Type of bug: UI. Need to fix it.
Today Households Visited should be present all time. Even we don’t have any data. It need to show 0.. Need to fix it
The breadcrumb is not correct as per Figma. Not Done. Bug.
Swathi Comments: Type of bug UI: Need to fix it.
The title LLIN Campaign Dashboard should be configurable based on the selection from the Landing Page Not Done Enhancement
Swathi Comments:
Abhishek Suresh Can you Please explain this.
Neelakantan S The title of the overview page should be user selection from the card layout.
The name of the selected province should appear in the page title along with LLIN Not Done Bug
Eg: Tete, Zambezia
The title should be configurable. i.e. it should be the same as the link which the user clicked on the landing page. So the title should be → ‘’Name of the link on the card layout that the user selects” + Campaign Dashboard + (Name of the province that the user selects). For eg: LLIN Campaign Dashboard (Tete)
Swathi Comment: Type of bug: UI. Need to fix it. The name of the province & district should also been shown as per Figma.
In the Custom Date range selection, Not Done. Bug.
Not able to select the first 2 days of the Start date of the campaign (30th,31st). The number of days in the campaign as per progress bar is 7 days. The cumulative selection shows the campaign start date as 30th, which means the campaign end date should be 5th April. But in the calendar, April 6th is also highlighted.
Swathi Comment: Not able to select the first 2 days of the Start date of the campaign(30th,31st)-->
Abhishek Suresh For this need you need to change the month in the date picker.
The no.of days in the campaign as per progress bar is 7 days. The cumulative selection shows the campaign start date as 30th, which means the campaign end date should be 5th April. But in the calendar, April 6th is also highlighted.--->
For this we need to discuss with Neelakantan S.
When downloading the entire page as PDF, the last portion and the graphs in that is not being displayed.
Also when sharing the page as pdf/image across email/Whatsapp same issue. Not Done. Enhancement.
Swathi Comments: Type of bug:Functionality. Need to fix it. This is happening for the PDF download at 100% screen.
The labels are not matching as per Figma Not Done For households, Population, Bed nets distributed KPI cards
a. Cumulative missing in the brackets
b. For selected date range missing in brackets
Swathi Comments: Type of bug:UI. We had used the KPI sheet labels.
So, Abhishek Suresh can you please confirm which we need to follow. Earlier it was told that I need to follow the KPI sheet.
7. The insights are missing for Total households visited till Today for Households, Population, Bed nets distributed KPI cards Not Done Bug
Swathi Comment: Type of bug: Functionality. Need to fix it.
8. Tool tips are getting cropped
a. Total bed nets distributed till today
b. Bed nets coverage till today
Swathi Comment: Type of bug UI Need to fix it.And this depends on screen resolution.
9. Rename tooltip to → “ The total number of households where no delivery has taken place for the selected date range” Enhancement Not Done Can be picked
10. Rename tooltip to → “ Total number of complaints by status for the selected date range” Enhancement Not Done Can be picked
11. Households coverage ranking chart Enhancement Not Done Can be picked
a. Show % next to the numbers on the Y-axis (eg: 20%)
b. Rename legend from Households Percentage → Households coverage. Same should be applied on the labels that appear when you hover on each bar
12. On the brush component , the name of the boundary (Angonia) is coming up Bug Not Done (Same across all graphs)
Swathi Comment: Type of bug: UI. Need to remove the names on the brush component. Need to fix it
13. By default - the custom date range is selected for the page. It should be ‘Today’ Bug. Not Done.
Swathi Comment: Need to fix it.
14. Sub heading missing as per Figma. Make the sub heading same as the tool tip - Bug Not Done
Swathi Comment: Type of bug UI Need to fix it.
15. While downloading/sharing the graphs, the sub headings are getting distorted - Bug. Not Done (Please check this for all graphs with sub headings). Same for complaints by type pie chart).
Sub headings missing for following charts Not Done Bug
a. For Number of days chart.. The sub heading should be → “No.of days the inventory can last as of today”.
b. For stock in hand chart - subheading to be same as figma
Swathi Comment: Type of bug: UI. Need to fix.
Default date for the page is not set for Today. Instead it is for Custom. Not Done. Bug.
Swathi Comment: Need to fix it.
Rename the tooltip District → District Name
Swathi:Comment: This was not mentioned anywhere Abhishek Suresh in the KPI sheet also. So I considered it an Enhancement. Need to fix it
This is not done yet. The summary report has drill-down Invalid Part of V1.1
Swathi:Comment: This was done as part of the V1.1. Not in V1.0.
Summary Report Not Done Bug
a. Localisation missing for district names
b. The default is not set to a→z alphabetically for district names
Swathi Comment: Type of bug: UI.
a. Localisation missing for district names yeah this is not done still. Till Start fixing this.
b. Need to fix it
Nets returned missing in the summary report Not Done Enhancement
Swathi:Comment: The Dev team has mentioned that they are not considering a few columns even if it is present In KPI sheet. So, I need to clarify whether it needs to be considered or not.
The page share and download buttons are not working Not Done Bug
Swathi Comment: Type of Bug: Functionality. Need to fix it. No Options are shown to download or Share.
The page download and share buttons are not working Not Done Bug
Swathi Comment: Type of Bug: Functionality. Need to fix it. No Options are shown to download or Share.
Households visited bar chart
a. On Y axis, add % next to the numbers –eg: 20%, 10% etc for % toggle Not Done Enhancement
b. For %: Edit legend to → % of Households visited against target Not Done Enhancement
c. For #, edit legend to → Number of households visited Not Done Enhancement
d. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold Bug Not Done
3. Population covered graph
a. Add % next to the numbers on the Y-axis for % toggle Not Done Enhancement
b. For % toggle: Rename legend to → % of Population covered against target Not Done Enhancement
c. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold Bug Not Done
4. Bed Nets distributed graph
a. Add % next to the numbers on the Y-axis for % toggle Not Done Enhancement
b. For % toggle: Rename legend to → % of bednets distributed against target Not Done Enhancement
c. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold Enhancement Not Done
5. Households not delivered
a. The tooltip is getting cropped Bug Not Done
Swathi Comment: This happens when we use 100% screen. It is working correctly on 80% of the screen. Type of bug:UI. Need to fix it.
b. Rename tooltip to → “ The total number of households where no delivery has taken place for the selected date range” Enhancement Not Done
c. The legend and upon hovering over the bar should only read ‘’Households not delivered’’.. Currently it has ..by district attached. Remove this Bug Not Done
Swathi Comment: Type of UI.
d. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold Bug Not Done
6. Target achievement map
a. The font on the map (% and the name) are not readable. Its different to that of Figma. Please align this as of Figma Bug Not Done
Swathi Comment: Type of bug:UI. Need to fix it.
b. The boundary thickness is much higher. Pls reduce this Bug Not Done
Swathi Comment: Type of bug:UI. Need to fix it.
c. Spell-check : Achievement → Achievement Bug Not Done
Swathi Comment: Type of bug:UI. Need to fix it.
d. he tooltip upon hovering should be done over the boundary and not the text Bug Not Done
Swathi Comment: Type of bug:Functional & UI. Need to fix it.
e. The subtext is not as per Figma → Target achievement across boundaries. (Click on the boundary to drill-down) Bug Not Done
Swathi Comment: Type of bug:UI. Need to fix it.
f. Spacing between the toggle and kebab menu is too low. Please maintain it as per figma Not Done Bug
Swathi Comment: Type of bug: UI. Need to fix it.
g. There should be a restriction on the heat map to limit the extent of scrolling outside the map area. Currently the user can scroll too far outside the map area into the white space and it is difficult to get back on the map area by scrolling back in Not Done Bug.
Swathi Comment:This has already brought points to Neelakantan S point of view . But he said it’s difficult to fix. This has already brought point to Neelakantan S. But he said it’s difficult to fix.
h. For the insights case ‘Same as yesterday’ , 0% should not be shown. Only ‘Same as yesterday’ is required. Not Done Enhancement
i. The sub heading is getting distorted while downloading/sharing the map
7. Planned versus Actual Campaign Progression
a. Toggle and charts missing for Population, Nets Invalid Part of V1.1
b. ‘’Number of Households” legend missing on the Y-axis Not Done Bug
Swathi Comment: b. Type of bug: UI. Need to fix this
c. Rename legends Not Done Bug
- Target → Planned
- Distributions → Actual
- Prediction_Distributions → Prediction (Localisation Missing)
Swathi Comment: Type of bug: UI & Functionality. Need to fix this.
d. The X-intercept for Planned and Actual plots is not shown. The X-intercept should read as per how its in Figma (Planned target date & Expected Target Date) Not Done. Bug.
Swathi Comment: Neelakantan S will answer this .
e. The title of the graph should not have (Households) in brackets Invalid
Swathi Comment: This is kept because present we had only done only for Household.
8. Summary Report
a. Localisation missing for boundary names Not Done Bug
Swathi Comment: Type of Bug UI. Need to fix.
b. Rename HH → Households
Swathi Comment: This is same as KPI sheet
Rename the tooltip District → District Name Not Done Enhancement
c. The tool tip for Target Achievement % Population is not correct in both Boundary and Day toggle. Please change it to as per KPI sheet Not Done Bug
Swathi Comment: Type of Bug UI. Need to fix.
d. Rename tooltip for Rejected, Relocated, Closed for both Boundary & Day toggle to → “ The total number of households where no delivery has taken place for the selected date range” Enhancement Not Done.
Complaints by Boundary
a. The name of boundary is appearing on the brush component Bug Not Done
Swathi Comment: Abhishek Suresh can you plz explain this.
b. Not enough spacing between the sub heading and the graph Bug Not Done
Swathi Comment: Type of Bug UI. Need to fix.
c. Sub heading getting distorted while downloading/sharing the graph Bug In Progress
d. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold. Ref to Figma Bug Not Done
Swathi Comment: Type of Bug UI. Need to fix.
2. Complaints by Type
a. The pie chart is not covering the whole of the space and there is too much white space. Pls refer to Figma Bug Not Done
Swathi Comments: Neelakantan S needs to confirm this.
b. The tooltip definition for the title is missing. Ref to KPI sheet Bug Not Done
Swathi Comment: Type of Bug UI. Need to fix.
3. Complaints by Status
a. Remove ‘by District’ from all legends and tooltips on hover Bug Not Done
b. Boundary name appearing on brush component Bug Not Done
c. The spacing between title and the graph is low. Ref to Figma Bug Not Done
d. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold. Ref to Figma Bug Not Done
Swathi Comment: From a to d. Type of Bug UI. Need to fix.
4. Complaints by Type & Boundary
a. Boundary name appearing on brush component Bug Not Done
b. The spacing between title and the graph is low. Ref to Figma Bug Not Done
c. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold. Ref to Figma Bug Not Done
d. The tooltip definition for the title is missing. Ref to KPI sheet Bug Not Done
Swathi Comment: From a to d. Type of Bug UI. Need to fix.
5. Boundary wise share of complaints
a. Boundary name appearing on brush component Bug Not Done
b. The spacing between title and the graph is low. Ref to Figma Bug Not Done
c. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold. Ref to Figma Bug Not Done
d. The tooltip definition for the title is missing. Ref to KPI sheet Bug Not Done
e. Add % to the numbers on the Y-axis (50%, 60% etc..) Enhancement Not Done
f. Rename the legend from ‘’Complaints by District’’ → ‘’% of Total Complaints by District’’
Swathi Comment: From a to d. Type of Bug UI. Need to fix.
a. Boundary name appearing on brush component Bug Not Done
b. The spacing between title and the graph is low. Ref to Figma Bug Not Done
c. The tool tip definition is wrong. Bug Not Done
d. The font of the text upon hovering over graph- No distinction btw boundary name and status: Make the boundary name in bold. Ref to Figma Bug Not Done
e. Title getting distorted while sharing/downloading Bug Not Done
Swathi Comment: From a to d. Type of Bug UI. Need to fix.
7. Summary Report (Total Complaints)
a. Localisations missing for boundary names Bug Not Done
Swathi Comment:Type of Bug UI. Need to fix.
b. The Dates column sorting is not proper Bug Not Done
Swathi Comment:Type of Bug UI. Need to fix.
Swathi Comment: Type of Bug Functional . Need to fix.
8. Summary Report (Open Complaints)
a. Change the calculation to include the case = Enhancement Not Done
- Open since < 6 hrs
- Open since >= 6 hrs & <12 hrs
- Open since >=12 hrs & < 24 hrs
- Open since >= 24 hrs & <48 hrs
- Open since > = 48 hrs
- Localisations missing for boundary names Bug Not Done
9. Share/Download buttons for the page not working
6. Average Complaint Resolution time (hrs)
